 |
 |
| Wanted / Available
Business Proposals and Business Opportunities
for Joint Ventures, Take-over, Mergers & Acquisitions,
Running / Closed, Profit-making / Loss-making
Private / Public Limited Companies, Technical
Know-how, Technical / Project / Turnkey Consultants,
Used / New Machinery, Factory Bldgs / Industrial
Sheds, Retail & Commercial Buildings, Hotels,
Resorts, Restaurants, Venture Capital, Pvt. /
Institutional Finance, Low Cost International
Funding / Finance, Strategic Investors / Strategic
Investment. |
|
|
| |
| |
| |
| FNT-BIZ-C/01 |
A
running Petro-Chemical (Ethanol & Specialised Chemicals)
Manufacturing Unit for sale in Satara, Maharashtra |
| The
Expected Price for the complete infrastructure (Land,
Building, Plant & Machinery) along with all the
licenses & approvals = Rs.3.35 crore.
- The company is a running Petro-Chemical (Ethanol / Specialised
Chemicals) manufacturing unit located at Satara in
Maharashtra. The manufacturing plant is located at
Satara in Maharashtra.
- The Raw material for Ethanol would be Specialized
Denatured Spirit (R.S).
- For manufacturing the Specialised
Chemicals the raw material will vary according to
the products and for Specialized Solvents raw material
is purchased from GAIL India L.T.D.
- The Ethanol Manufacturing unit is in SS-304. The capacity is 9lakh Litres per Month, (This includes
all the P/M related to Ethanol, Storage capacity of 10lakh litres of Ethanol, Boiler (mfr by Elite Thermal
3 ton 10 kg Pressure baggase fired). The Plant and Machinery are in very good condition.
- The second manufacturing plant is a Multi-utility Chemical Plant. It is in SS-316, (This includes P/M
related to MUP, 3lakh litres storage capacity, Furnace Oil Boiler 4 Kcal). This plant is just a year old.
- In the Multy-utility plant the following Specialized
Chemicals/Products are manufacture:
Distillation
of |
Acetone |
DME |
DMF |
IPA |
Perfumery
Products |
Benzyl Acetate |
Benzyl Alcohol |
Butyl-cello solves Acetate |
- |
Bio-Diesel |
- Land Area is 11925 Sq.Mtrs. (approx. 3 acres)
- Bank: No
Objection Certificate (NOC) or any other Permission
required for sale or takeover shall be given after
the primary discussions are over. We already have
bank's verbal approval for the same. Every formality
shall be completed after the bank's approval.
- We have Bank liability, so we shall fulfill / clear
all the conditions / liabilities of the Bank before
we proceed further. We shall take care that the BUYER
get a clean Company if he decides to Buy / Acquire
/ Purchase / Take over.
- The Asking Price is inclusive of all the licenses stated
below:
No. |
License Details |
1 |
I.E.M (Industrial Entrepreneur Memorandum) |
1 |
Ethanol Manufacturing License |
3 |
S.D.S Storage License |
4 |
Factory Act License. (Under validation) |
5 |
Solvent 2007 (Under Renew) |
6 |
Explosive License |
7 |
Pollution Consent to establish is available and
Consent to operate is under process |
8 |
High Court order to sell; buy Ethanol or Denatured
Spirit to any Customer. |

|
| FNT-BIZ-C/02 |
A new unused Anhydrous
Ethanol Manufacturing unit at Patalganga, Raigad, Maharashtra
for Joint Venture/Sale |
|
-
Land Area - 2.25 acres
-
The unit is located next to Reliance
Rasyani, Patalganga, Khopoli.
-
The ethanol manufacturing unit
has a capacity of 50000 liters per day with all
licences and approvals.
-
Molecular seves based D.C.S
system.
- Storage capacity 17 lakh liters.
- Asking Price for Plant & Machinery only
would be Rs.1.15crore.
-
Asking Price for the
complete manufacturing set-up i.e. Land, Factory
Building, Plant & Machinery is Rs.4.5 crore.
- Click
here to download the list of Plant & Machinery.
- If you wish to go for a plant visit, kindly forward
the MANDATE LETTER on your Company Letterhead accepting
the Terms & Conditions of the Consultancy. Click
here to download the MANDATE LETTER format.

|
| FNT-BIZ-C/03 |
A running
Mineral Soda manufacturing company in North India for
Sale or Take-over |
- The Company is India's one of the leading manufacturers
of Carbonated Mineral Water pioneering the concept
of PET bottle soda.
- The Company was founded by two enterprising entrepreneurs
with a novel concept of Mineral Soda in PET bottles.
- The Mineral Soda was launched in 1998 when all major
players in the market were using glass bottle for
soda.
- With 160 distributors and 7 Clearing and Forwarding
Agents spread over 7 States viz. Punjab, Haryana,
Himachal Pradesh, Jammu & Kashmir, Rajasthan,
Uttar Pradesh, Uttaranchal, National Capital Territory
of Delhi and Union Territory of Chandigarh, the Company
claims to be the largest selling mineral soda company
in North India.
- In order to meet its requirement for PET Performs
used for bottles and CSD Closures, the Company decided
to develop an in-house import division instead of
relying on the local suppliers.
- Generally, soda is made from ordinary or filtered
water but this brand is made from the water that is
treated to make it low in TDS (Total Dissolved Solids)
by removal of undesired hard minerals. It is then
blended and chilled for effective carbonation. The
carbonated water is then filled into bottles.
The supervisor checks the quality of soda by maintaining
the pressure of CO2 and also by tasting the soda.
Soda bottles are then inspected through illuminated
light to check for any kind of impurity that might
have moved in to the liquid. Bottles, after inspection,
are capped. The bottles are then tested for leakage
and are sent to the soaking bay where they are kept
for at least 72 hours for any kind of deformity, leakage,
ballooning, bursting. Thereafter, the bottles are
labeled. The labeled bottles are kept in trays for
shrink-wrapping.
- From a single member family, the Mineral Soda brand
today has grown to a tribe of big and small members:
Party 1.5 litre, Jumbo 2 litre, Mini 400 ml, Regular
600 ml.
- With a view to exploring new possibilities, the
innovative leaders of the team have now introduced
a flavoured Mineral Soda brand without sugar.
The Unique Selling Propositions are:
- No deposit to retailer for the safe return of bottle
as is the case for glass bottles.
- Disposable nature of product makes it the most convenient
companion of travelers who had either to wait at some
place or deposit the security.
- PP Caps have replaced crown caps making it easier
to recap the bottle for reuse again.
- Corrugated trays along with shrink pouch replace
wooden or plastic crates and are disposable in nature.
- Because of throwaway nature, and new bottle sourced
every time makes it is easier to control the impurities.
The deal can be in two ways:
- Composite, which means land, building, plant and
machinery on 'as-is-where-is-basis'. The area of both
factories are 2000 sq.yards and the built-up area
details are 3600 sq. ft. office and with RCC and 6100
sq.ft. in shed. The expected price is Rs.1.5 crores
inclusive of all present liabilities of the firm etc.
or Rs.1.30 crores without bank and hidden liabilities.
- Only Plant and Machinery where the expected price
is Rs.90 lacs. The detailed list of the PLant and
Machinery will be sent on request.

|
| FNT-BIZ-C/04 |
A 2 X 50TPD
Sponge Iron cum Steel Ingots Manufacturing Plant at Jamshedpur
for Sale or Acquisition |
-
2 X 50 TPD Sponge Iron Plant
of TGS & B.K.Engineering-make is in excellent running
condition. Similarly the Induction Furnace of Electrotherm-make
for manufacture of Ingots is also in running condition
with full capacity utilization.
-
Sponge Iron unit was commissioned
in the year 2000 and Ingots unit in the year 1997.
-
Sponge Iron unit is having Coal
Linkage with CCL for 38,400MT p.a.
-
Power supply connection for both
the units is arranged from Jharkhand State Electricity
Board and the power supply in Industrial Area is
excellent.
-
Both the units are complying
with Pollution norms to the satisfaction of the
Board officials.
-
Both the units do not have any
Term Loan liability with any financial institution.
Only Cash Credit limits against inventories are
availed.
- No other Government or statutory liabilities exist
for both the units.
- Sponge Iron Plant has a concrete road for movement of vehicles & materials handlings.
-
As our Group is engaged in major
expansion programme in other region, full attention
could not be paid to these well-run units for the
sustenance of excellent performance hence are being
disposed off.
-
Both the units are ideally located
for procurement of Raw Materials supported with
other infrastructural facilities essential for any
unit to operate soundly.
- Click
here to download the list of Plant & Machinery.
- The proposed Sale price of both the units
together is fixed at Rs.17 Crores.
- If you wish to go for a plant visit, kindly forward
the MANDATE LETTER on your Company Letterhead accepting
the Terms & Conditions of the Consultancy. Click
here to download the MANDATE LETTER format.

|
| FNT-BIZ-C/05 |
Sale
of complete Plant & Machinery for the manufacture
of HDPE/PP Woven Sacks |
-
The plant is located at Vishwakarma
Industrial Area, Jaipur, Rajasthan. The plant and
machinery has to be sold by the promoters in a complete
lot or in parts depending upon the requirement of
the buyers. However the same shall have to be mutually
discussed.
-
The plant and machinery is being
sold on “as is where is” basis. All
machines are in working condition. Factory was closed
because of labour problem about 3 years back.
-
There is no loan or liability
of banks or financial institutions. All the assets
of the company are free from any lien or encumbrances.
Delivery of plant and machinery can be given immediately
against payment.
-
Details of Plant &
Machinery
-- |
Type |
Make |
No. of
Machine |
Year of
Procurement |
Capacity
of the Machines |
| 1 |
EXTRUDER : |
|
|
|
|
| A |
Extruder 65mm / T-Die 600 mm |
Klockner Windsor India Ltd., Vatva |
1 |
1991 |
80 kg/hr |
| B |
Extruder 90mm / T-Die 1100 mm |
J.P.Industries, Ankleshwar / EDI (Lohia) |
1 |
1996 |
250 kg/hr |
| |
T-Die 1100 mm (Extra) |
J.P.Industries , Ankleshwar |
|
|
|
| C |
Extruder 75mm / T-Die 1000 mm |
J.P.Industries , Ankleshwar |
1 |
1995 |
150 kg/hr |
| D |
Extruder 75mm / T-Die 750 mm |
J.P.Industries , Ankleshwar |
1 |
- |
100 kg/hr |
| 2 |
WEAVING MACHINE : |
|
|
|
|
| A |
Circular Looms |
Lohia Starlinger Ltd., Kanpur |
23 |
1995 |
2100 Mtrs/day |
| |
|
Cirwind Machine Mfg. Co. |
25 |
1995-96 |
2100 Mtrs/day |
| B |
Air Jet Looms |
Harish Textiles (Sparingly used) |
2 |
1984-85 |
1500 Mtrs/day |
| 3 |
CHEESE WINDER |
EMI / Precitex / Cirwind |
350 |
1994-96 |
- |
| 4 |
LAMINATION PLANT |
Sunderlam Industries, Bangalore |
1 |
1992 |
30000 Mtrs/day |
| 5 |
STITCHING MACHINES |
Armstrong, Ahmedabad |
20 |
1994/95/96 |
8000 bags/day |
| 6 |
PRINTING |
|
|
|
|
| A |
Four colour with CORONA DISCHARGE TREATMENT |
Rishi Laser Cutting Ltd., Mumbai |
1 |
1998 |
30000 bags/shift |
| B |
Single Colour |
|
4 |
- |
180000 bags/day |
| C |
Double Colour |
|
2 |
1992 |
|
| 7 |
BALING PRESS |
|
|
|
|
| A |
Electrical |
|
2 |
1997 |
200000 bags/day |
| B |
Hydraulic |
|
1 |
1998 |
|
| 8 |
CHILLING PLANT |
|
|
|
|
| A |
15 TR |
Frick India, Faridabad |
1 |
1989 |
|
| B |
40 TR |
Mistral A/C Servicing Co.Ltd., New Delhi |
1 |
|
|
| 9 |
CUTTING TABLE (Manual Type) |
|
8 |
|
|
| 10 |
TESTING EQUIPMENT |
|
|
|
|
| |
Fabric / Tape Strength Machine |
Blue Star Ltd., Ahmedabad |
1 No. |
|
|
| 11 |
Complete stores items of
spares, accessories, motors, gear boxes etc. for
all above.
|
|
1 set |
|
|
| 12 |
Set of equipment for material
handling & Transportation |
|
1 set |
|
|
| 13 |
Weighing scales, electronic
platform type of various size and capacity |
|
1 set |
|
|
| 14 |
Complete quality control
lab including UTS testing m/c, electronic weigh
scales, tools and calipers
|
|
1 set |
|
|
| 15 |
Maintenance tools and tool
sets, electrical maintenance, motors, torque testers
etc.
|
|
1 set |
|
|
| 16 |
Cheese winder pipes sufficient
for complete working of the unit
|
|
1 Lot |
|
|
| 17 |
Main LT panel, sub-distribution
panels complete cabling, switch gears as installed
|
|
1 Lot |
|
|
| 18 |
Complete utilities including
cooling towers etc., as installed
|
|
1 Lot |
|
|
|
|
| |
|
|
| |
|